Eufy X10 Pro Omni Vs Roborock S8 Maxv Ultra Featured Image
| |

Eufy X10 Pro Omni vs Roborock S8 MaxV Ultra (2026)

Last updated: April 9, 2026

Some links in this article are affiliate links — we may earn a commission if you make a purchase, at no extra cost to you. Read our full disclosure.

If you are shopping for a premium robot vacuum-mop combo in 2026, the Eufy X10 Pro Omni vs Roborock S8 MaxV Ultra matchup is probably keeping you up at night. Both of these flagships promise to vacuum, mop, empty their own dustbins, and wash their own mop pads — all without you lifting a finger. The catch? The Roborock costs roughly twice as much. We spent three weeks testing both machines in a 1,200-square-foot apartment with hardwood floors, area rugs, and a very enthusiastic golden retriever to answer the only question that matters: is the Roborock S8 MaxV Ultra actually worth the premium, or does the Eufy X10 Pro Omni deliver 90% of the performance at half the price?

Quick Verdict: The Eufy X10 Pro Omni (~$799) is our best value pick for most households. The Roborock S8 MaxV Ultra (~$1,599) wins on raw performance and obstacle avoidance, but the gap is narrower than the price difference suggests.

Quick Comparison Table

Feature Eufy X10 Pro Omni Roborock S8 MaxV Ultra
Price (as of April 2026) ~$799 ~$1,599
Suction Power 8,000 Pa 10,000 Pa
Mopping System Dual rotating pads, auto-wash VibraRise 3.0 sonic, hot water wash
Obstacle Avoidance AI.See camera system Reactive 3D + dual-light LiDAR
Self-Empty Noise ~72 dB ~68 dB
Mop Lift 12mm 20mm
Base Station Size 15.4 x 17.1 x 18.9 in 16.5 x 18.1 x 19.7 in
Water Tank (clean/dirty) 3L / 3L 3.5L / 3.5L
Dust Bag Capacity 2.5L 2.5L
Multi-Floor Mapping Up to 3 floors Up to 4 floors
Smart Home Google Home, Alexa Google Home, Alexa, Matter (beta)

Suction Power: How Much Does 2,000 Pa Really Matter?

On paper, the Roborock S8 MaxV Ultra’s 10,000 Pa of suction should blow the Eufy’s 8,000 Pa out of the water. In practice, the difference is less dramatic than you might expect.

We ran both vacuums across the same test grid three days in a row. On bare hardwood, both machines picked up crushed Cheerios, scattered flour, and fine sand with near-perfect efficiency. The Eufy left behind about 2% more fine particulate on our white-cloth test, but you would never notice the difference with your eyes.

Where the extra suction actually shows up is on medium-pile carpet. We scattered a measured tablespoon of baking soda into a 2×2-foot section of our area rug and ran each vacuum over it twice. The Roborock pulled roughly 15% more powder out of the carpet fibers on the first pass, and by the second pass the difference narrowed to about 8%. For homes that are mostly hardwood or low-pile carpet, the Eufy’s 8,000 Pa is more than sufficient. If you have wall-to-wall medium or high-pile carpeting, the Roborock’s extra power starts to justify itself.

Pet hair tells a similar story. Both machines handled golden retriever fur on hardwood without any tangling issues thanks to their rubber brush rolls. On our area rug, the Roborock was marginally better at extracting embedded pet hair in a single pass, but the Eufy caught up after its second scheduled run of the day.

Mopping Performance: Rotating Pads vs Sonic Vibration

This is where the two machines diverge most dramatically in their approach, and honestly, it is the category where spending more money gets you the most tangible improvement.

The Eufy X10 Pro Omni uses dual rotating mop pads that spin at about 180 RPM. The base station washes these pads with room-temperature water after each session. It does a solid job on everyday grime — kitchen grease splatters, muddy paw prints, and dried coffee drips all came up without pre-treatment. The mop applies consistent downward pressure, and the rotation helps scrub more aggressively than a simple drag-style mop pad.

The Roborock S8 MaxV Ultra takes a fundamentally different approach with its VibraRise 3.0 system. The sonic mopping pad vibrates at up to 4,000 times per minute while the base station washes with hot water (around 140 degrees Fahrenheit). The hot water washing makes a real difference in pad cleanliness between rooms — by the time the Roborock starts mopping your bedroom, the pad is genuinely clean, not just rinsed.

We tested both on a dried ketchup stain (left for 24 hours on sealed hardwood). The Eufy lightened the stain noticeably but required a second pass to remove it fully. The Roborock removed it in a single pass. For sticky, dried-on messes, the Roborock’s sonic vibration combined with hot water washing delivers results that feel closer to hand-mopping.

The Roborock also wins on mop lift height — 20mm versus the Eufy’s 12mm. Both machines automatically lift their mop pads when they detect carpet, but the Roborock’s extra clearance means thicker area rugs stay bone dry. With the Eufy, we noticed very slight dampness on the fringe of our thicker shag rug, though the carpet surface itself stayed dry.

Obstacle Avoidance: Cables, Socks, and the Pet Waste Test

Nobody wants their robot vacuum spreading pet accidents across the house, so obstacle avoidance is non-negotiable in 2026. Both machines use camera-based systems, but the Roborock’s hardware is a clear step above.

The Eufy X10 Pro Omni relies on its AI.See camera system, which uses a single front-facing RGB camera combined with machine learning to identify and avoid common obstacles. We tested it with charging cables, a pair of socks, a dog toy, and a simulated pet waste obstacle. The Eufy successfully avoided the socks and dog toy every time, navigated around charging cables about 85% of the time, and correctly identified and avoided the pet waste dummy in 9 out of 10 runs.

The Roborock S8 MaxV Ultra uses a Reactive 3D system that combines a structured-light 3D scanner with a dual-light RGB camera. This hardware combination means the Roborock can see obstacles in complete darkness and gauge their exact dimensions. It avoided every obstacle in our test suite with a 100% success rate across 10 runs, including the charging cables that occasionally tripped up the Eufy. The Roborock also maintained a tighter clearance around obstacles — typically 2-3 centimeters — so it cleaned more floor area near the objects rather than giving them a wide berth.

If you have a home with lots of floor clutter — kids’ toys, pet accessories, shoes by the door — the Roborock’s obstacle avoidance is genuinely best-in-class. If your floors are generally tidy and you are mainly worried about the occasional charging cable, the Eufy handles the job well enough.

Mapping and Navigation

Both vacuums use LiDAR-based mapping and can create accurate multi-floor maps. The Eufy supports up to three floors while the Roborock handles four, though most households will never need more than two or three.

Initial mapping speed is where the Roborock pulls ahead. It mapped our entire 1,200-square-foot apartment in about 8 minutes on its first run. The Eufy took closer to 12 minutes, partly because it navigates more cautiously around furniture during its mapping pass. After the initial map is created, both machines clean efficiently with methodical back-and-forth patterns.

The Roborock’s map management is also more flexible. You can set different suction levels and mopping intensity for individual rooms, create invisible walls and no-mop zones with greater precision, and schedule specific rooms for specific days. The Eufy offers room-level customization too, but the interface feels slightly less polished and the zone-drawing tools are less precise.

Both apps support voice control through Google Home and Alexa. The Roborock has added beta Matter support as of early 2026, which could be meaningful if you are building a Thread-based smart home ecosystem. The Eufy does not currently support Matter.

Base Station: Size, Noise, and Maintenance

These are large appliances, and the base station is where you will feel the size difference most. The Roborock’s base is about an inch wider and an inch taller than the Eufy’s. Both are bulky enough that you will want to plan a dedicated spot — a closet nook, laundry room corner, or under a console table.

Self-emptying noise is a real consideration, especially if the vacuum runs overnight or during work-from-home hours. We measured the Eufy at approximately 72 dB during its self-empty cycle, which sounds roughly like a regular upright vacuum. The Roborock came in quieter at about 68 dB. Both cycles last around 10-15 seconds, so the noise is brief, but if you are in the same room it is noticeable.

Tank sizes are close. The Roborock edges ahead with 3.5-liter clean and dirty water tanks versus the Eufy’s 3-liter tanks. In practice, both need refilling and emptying every 3-4 days when running daily mop cycles in our apartment.

The Eufy’s hot-water drying cycle after mop washing takes about 2 hours. The Roborock’s takes closer to 2.5 hours due to the hot water wash step. Both machines can be set to auto-dry, and we recommend keeping this enabled to prevent mold or mildew on the mop pads.

Annualized Maintenance Costs

Robot vacuum running costs add up, so we calculated what a year of ownership looks like for each machine beyond the purchase price.

Item Eufy X10 Pro Omni Roborock S8 MaxV Ultra
Dust bags (4-pack) ~$15 (replace every 4-6 weeks) ~$20 (replace every 4-6 weeks)
Mop pads (2-pack) ~$18 (replace every 3 months) ~$22 (replace every 3 months)
Side brushes (2-pack) ~$10 (replace every 6 months) ~$12 (replace every 6 months)
Main brush roll ~$20 (replace annually) ~$25 (replace annually)
Estimated annual cost ~$120-140 ~$150-170

The difference in annual maintenance is roughly $30-40 per year — not dramatic enough to sway a buying decision on its own, but worth noting when you are already paying $800 more upfront for the Roborock.

Real-World Testing: Three Days in a 1,200 Sq Ft Apartment

We ran both vacuums on identical schedules over three days in our test apartment: hardwood in the living room and bedroom, tile in the kitchen and bathroom, and two medium-pile area rugs. Our golden retriever provided a continuous supply of pet hair.

Day 1: Both machines mapped and cleaned the full apartment. The Roborock finished about 8 minutes faster (52 minutes vs 60 minutes). Both returned to base with full dustbins. Mopping results were comparable on the tile floors, though the Roborock left the kitchen tile looking slightly shinier.

Day 2: We added controlled messes — flour in the kitchen, crushed crackers under the dining table, and a dried coffee spill in the hallway. Both handled the dry debris well. The Roborock removed the coffee stain in one pass; the Eufy needed two.

Day 3: We focused on edge cleaning, measuring how close each vacuum got to baseboards using a tape measure. The Roborock consistently cleaned within 5mm of the baseboard edge. The Eufy averaged about 8-10mm, leaving a thin strip that would need occasional manual attention. Both machines activated carpet boost reliably on the area rugs.

App Experience

The eufyClean app and the Roborock app are both mature platforms at this point, and both get the fundamentals right — scheduling, map editing, cleaning history, and firmware updates.

The Roborock app feels more polished overall. The 3D map view is visually impressive and genuinely useful for placing no-go zones. Room labeling is automatic and accurate. You get granular control over suction and water flow for each room, and the cleaning history includes detailed route maps.

The eufyClean app is functional but slightly less refined. Map editing works well, and scheduling is straightforward. Where it falls short is in the details — room detection occasionally mislabels spaces, and the interface for setting per-room cleaning preferences requires a few extra taps. Eufy has improved the app significantly over the past year, but Roborock still has the edge in software experience.

Who Should Buy Which?

Buy the Eufy X10 Pro Omni (~$799) if: Check price on Amazon

You want excellent all-around cleaning performance without spending over a thousand dollars. Your home is primarily hardwood or low-pile carpet. Your floors are generally tidy without a lot of small clutter. You are upgrading from a basic robot vacuum and want the self-empty, self-wash experience at the lowest possible price for this tier of performance.

Buy the Roborock S8 MaxV Ultra (~$1,599) if: Check price on Amazon

You have a mix of carpet types including medium or high-pile. You have kids, pets, or generally cluttered floors where best-in-class obstacle avoidance matters. You want the best possible mopping performance that comes as close to hand-mopping as a robot can get. You want Matter smart home integration. You value a premium app experience with granular room-by-room controls.

Final Verdict

The Eufy X10 Pro Omni is the robot vacuum-mop we would recommend to most people. It delivers about 85-90% of the Roborock S8 MaxV Ultra’s performance for half the price, and for the majority of homes with mostly hard floors and reasonable tidiness, that last 10-15% simply is not worth $800 extra.

The Roborock S8 MaxV Ultra is the better machine by every measurable standard — stronger suction, better mopping, superior obstacle avoidance, and a more polished app. If you have the budget and you want the absolute best robot vacuum-mop on the market in 2026, it earns its premium. Just know that the law of diminishing returns is in full effect here. For more hands-on product comparisons, visit HomeToolHQ.

Buy the Eufy X10 Pro Omni on Amazon | Buy the Roborock S8 MaxV Ultra on Amazon

Frequently Asked Questions

Can the Eufy X10 Pro Omni handle pet hair as well as the Roborock S8 MaxV Ultra?

Both machines handle pet hair very well on hard floors, and neither experienced brush tangling issues during our three weeks of testing with a golden retriever in the home. For more product matchups like this one, check out our smart home reviews. The Roborock has a slight edge on carpet pet hair extraction thanks to its higher 10,000 Pa suction, but the difference is marginal. If pet hair on hard floors is your main concern, both vacuums will keep up with heavy shedding without any trouble.

Do these robot vacuums work well on dark floors?

Both the Eufy X10 Pro Omni and the Roborock S8 MaxV Ultra use LiDAR navigation, which works independently of floor color. Some older robot vacuums with downward-facing cliff sensors misread dark floors as drop-offs, but both of these models handle dark hardwood and dark tile without issues. The Roborock’s structured-light 3D obstacle detection also works in complete darkness, which gives it an advantage for overnight cleaning runs.

How often do the base station water tanks need refilling?

Based on our testing in a 1,200-square-foot apartment running daily vacuum-and-mop cycles, both machines needed their clean water tanks refilled and dirty water tanks emptied roughly every three to four days. The Roborock’s slightly larger 3.5-liter tanks give it about half a day extra before needing attention compared to the Eufy’s 3-liter tanks, but the practical difference is minimal.

Is the Roborock’s Matter support useful right now?

As of April 2026, the Roborock S8 MaxV Ultra’s Matter support is still in beta. It allows basic start, stop, and dock commands through Matter-compatible smart home platforms, but room-specific controls and advanced features still require the Roborock app. If you are already building a Matter-based smart home ecosystem, it is a nice future-proofing feature. If you primarily use Alexa or Google Home, both vacuums integrate with those platforms equally well. Browse our home automation guides for more on building a connected home around these devices.

Which robot vacuum is quieter during regular cleaning?

During normal vacuum-and-mop operation, both machines produce similar noise levels in the 60-65 dB range — roughly the volume of a normal conversation. The Roborock is noticeably quieter during the self-empty cycle (approximately 68 dB versus the Eufy’s 72 dB), but since that cycle only lasts 10-15 seconds, the difference is unlikely to be a dealbreaker for most households.

Related HomeToolHQ guides: If you are comparing cleaning setups, start with our best robot vacuums guide, then check our best smart plugs guide and indoor air quality monitor guide for supporting home automation ideas.

HomeToolHQ is reader-supported. When you purchase through links on our site, we may earn an affiliate commission at no extra cost to you. Learn more

Similar Posts